7280L15PAI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 125mA |
| Max Supply Current | 125mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Density | 2.3 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7280L15PAI Overview
You can find FIFO memory chip in package TSSOP .Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 56 terminations.56 pin is used for operation.In order for FIFO design to operate, a maximum current of 125mA is required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.A self-contained gadget is contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.A total of 56 pins are present on the FIFO memory IC.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.FIFO memory ICs run at a frequency of 40MHz .
7280L15PAI Features
FIFOs category
Clock frequency of 40MHz
7280L15PAI Applications
There are a lot of Integrated Device Technology (IDT) 7280L15PAI FIFOs Memory applications.
- Data
- Battery Charger
- Cameras
- Alarm System
- Disk Controllers
- Notebook
- Microprogramming
- MP3 Interface for Automobile
- Data-acquisition systems
- Firmware loaders
