7280L15PAI8
| Parameters | |
|---|---|
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 125mA |
| Max Supply Current | 125mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Density | 2.3 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
7280L15PAI8 Overview
You can find FIFO memory chip in package TSSOP .Mounting it Surface Mount is recommended.A supply voltage of 5V is capable of producing high efficiency.I found that it has 56 terminations in FIFO means.There are 56 pins on the operation pins.In order to operate FIFO design, a maximum current of 125mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.Its maximum operating temperature of 85°C °C ensures stable operation.In FIFOs , there is a self-contained gadget.In this part, the memory type is OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.Currently, it has 56 pins.There are normally 5V power supplies attached to the component.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.In this FIFO memory IC, the clock runs at frequency 40MHz .
7280L15PAI8 Features
FIFOs category
Clock frequency of 40MHz
7280L15PAI8 Applications
There are a lot of Integrated Device Technology (IDT) 7280L15PAI8 FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Consumer Systems
- Signal processing
- Communications
- Industrial Systems
- Smart Meter
- Seismic Data Collection at Extreme Temperatures
- Fabrication Site
- Rate buffers
- Desktop Computers
