Parameters |
Length |
14mm |
Width |
6.1mm |
Thickness |
1mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
56 |
Published |
1999 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
RETRANSMIT |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Pin Count |
56 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
125mA |
Max Supply Current |
125mA |
Clock Frequency |
33.3MHz |
Access Time |
20 ns |
Organization |
512X9 |
Density |
2.3 kb |
Parallel/Serial |
PARALLEL |
Sync/Async |
Asynchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
FWFT Support |
No |
Output Enable |
NO |
Cycle Time |
30 ns |
7280L20PA Overview
FIFO memory chip is contained in the TSSOP package.It is pointing in the direction of Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.In FIFO means, there are 56 terminations.The operation pins are 56 pins.For its operation, 125mA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget in FIFOs is self-contained.This part has a memory type of OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.The FIFO memory IC has a total of 56 pins.There are normally 5V power supplies attached to the component.Using this gadget, RETRANSMIT can also be generated.There is 33.3MHz frequency set for the clock of the FIFO memory IC.
7280L20PA Features
FIFOs category
Clock frequency of 33.3MHz
7280L20PA Applications
There are a lot of Integrated Device Technology (IDT) 7280L20PA FIFOs Memory applications.
- MP3 Interface for Automobile
- SPD for DDR3 Memory Modules
- General Data Collection Applications at Low-Temperatures
- Event Recorder
- Test Equipment
- Digital buffering
- Smart Meter
- IP Radio
- Look-up Tables
- Tape controllers