72811L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X9 |
| Standby Current-Max | 0.01A |
| Memory Density | 4608 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72811L10PFG8 Overview
FIFO memory chip is included in the LQFP package.There is a case Tape & Reel in which it is packaged.It is pointing in the direction of Surface Mount .When the supply voltage is 5V , high efficiency is possible.I found that it has 64 terminations in FIFO means.64 pin is used for operation.In order to operate FIFO design, a maximum current of 60mA is required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is of the type OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.As a result, it contains a total of 64 pins.Normally, the FIFO memory's maximum value is 100MHz .Normally, the component owns 5V power supplies.
72811L10PFG8 Features
FIFOs category
Frequency at most
72811L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72811L10PFG8 FIFOs Memory applications.
- SPI Bus Flash Memory Device
- Optical memories
- Smart Meter
- Desktop Computers
- Notebook
- Controlled baseline
- Battery Charger
- Emulators
- Analog-to-digital converters
- SPI Bus Flash Memory Devices
