72811L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72811L15PF8 Overview
FIFO memory chip is included in the TQFP package.In the shape of a Tape & Reel , it's packaged.A Surface Mount mounting method is recommended.Supply voltages of 5V are capable of achieving high efficiency.The number of terminations in FIFO means is 64 .In the case of the operation pins, they are 64 pins.FIFO requires a minimum of 60mA current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.This gadget is self-contained in?FIFOs .The IC of the part is OTHER FIFO memory type.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.It has a total of 64 pins on it.In the presence of a 66.7MHz frequency, it can maintain good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.It is normal for the component to own 5V power supplies.
72811L15PF8 Features
FIFOs category
Frequency at most
72811L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72811L15PF8 FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Network switching/routing
- Multi-stage synchronizer
- SPI Bus Flash Memory Devices
- Extended product-change notification
- IP Camera Buffer
- Product traceability
- Firmware loaders
- Video time base correction
- Fabrication Site
