72811L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72811L15PFI8 Overview
TQFP is a package that contains FIFO memory chip.It comes in a Tape & Reel package.Surface Mount is recommended as the mounting method.An input voltage of 5V results in high efficiency.FIFO means contains 64 terminations.64 pins are used for operation.In order to operate it, it requires 60mA volts of current.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.It is contained within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.It consists of a total of 64 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .Normally, the component owns 5V power supplies.
72811L15PFI8 Features
FIFOs category
Frequency at most
72811L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72811L15PFI8 FIFOs Memory applications.
- Desktop Computers
- Medical Monitoring Device
- Computer Systems
- Rate buffers
- SPI Bus Flash Memory Devices
- HDD
- Laser Receiver System
- Analog-to-digital converters
- Buses
- IP Camera Buffer
