72811L15TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72811L15TF Overview
FIFO memory chip is contained in the TQFP package.Surface Mount is recommended as the mounting method.It is possible to achieve high efficiency with a supply voltage of 5V .64 terminations are contained in FIFO means.64 pins are used for operation.In order for FIFO design to operate, a maximum current of 60mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.FIFOs contains this gadget in its entirety.ICs of type OTHER FIFO are used in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.It consists of a total of 64 pins.It maintains good accuracy at a 66.7MHz frequency.For regular operation, the memory logic's maximum value is 66.7MHz .In normal circumstances, the component has 5V power supplies.
72811L15TF Features
FIFOs category
Frequency at most
72811L15TF Applications
There are a lot of Integrated Device Technology (IDT) 72811L15TF FIFOs Memory applications.
- Character generators
- Multimedia
- Wireless
- Consumer
- A/D output buffers
- Look-up Tables
- Tape controllers
- Transistors
- Communications
- Digital buffering
