72811L25TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72811L25TF Overview
The LQFP package contains FIFO memory chip.A Surface Mount mounting method is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO consists of 64 terminations, which indicates that FIFO means is empty.FIFO design has 64 operation pins.There is a maximum current requirement of 60mA for its operation.A 5V supply voltage will ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained in FIFOs .In this part, the memory type is OTHER FIFO .Low supply voltages, such as 4.5V V, may be required for operation.A maximum voltage of 5.5V volts can be applied to FIFO memory.It consists of a total of 64 pins.In spite of the frequency 40MHz , it is capable of maintaining a good level of accuracy.During regular operation, the FIFO memory's maximum value is 40MHz .The component normally owns 5V power supplies.
72811L25TF Features
FIFOs category
Frequency at most
72811L25TF Applications
There are a lot of Integrated Device Technology (IDT) 72811L25TF FIFOs Memory applications.
- A/D output buffers
- Video time base correction
- Product traceability
- Temporary storage elements
- Communications
- Optical memories
- Network bridges
- Battery Charger
- High-speed graphics pixel buffer
- Medical Monitoring Device
