72815LB15PF
| Parameters | |
|---|---|
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
72815LB15PF Overview
The TQFP package contains FIFO memory chip.The recommended mounting way is Surface Mount .A supply voltage of 5V allows for high efficiency.A total of 128 terminations can be found in FIFO means.In the case of the operation pins, they are 128 pins.In order to operate it, it requires 100mA volts of current.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .This part has a memory type of OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.Approximately 128 pins are attached to it.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.Components normally possess 5V power supplies.
72815LB15PF Features
FIFOs category
Frequency at most
72815LB15PF Applications
There are a lot of Integrated Device Technology (IDT) 72815LB15PF FIFOs Memory applications.
- Computer networks
- Queues for communication systems
- Character generators
- Data
- Smart Meter
- Network bridges
- A/D output buffers
- Application that requires re-writable nonvolatile parameter memory
- Test site
- Firmware loaders
