72815LB15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72815LB15PFI8 Overview
FIFO memory chip can be found in the TQFP package.It's packaged in the shape of a Tape & Reel .The recommended mounting way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains 128 terminations.In the case of the operation pins, they are 128 pins.In order for FIFO design to operate, a maximum current of 100mA is required.A voltage of 5V should be used for FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.There is a self-contained gadget within FIFOs .The IC of the part is of the type OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.There are a total of 128 pins on this FIFO memory IC.A frequency of 66.7MHz is sufficient to maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .Normally, 5V power supplies are owned by the component.
72815LB15PFI8 Features
FIFOs category
Frequency at most
72815LB15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72815LB15PFI8 FIFOs Memory applications.
- Telecommunication
- Rate buffers
- Analog-to-digital converters
- GPS Offender Tracking
- Emulators
- High-speed graphics pixel buffer
- Queues for communication systems
- Buses
- Computer Systems
- Notebook
