72815LB25PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72815LB25PF8 Overview
TQFP is a package that contains FIFO memory chip.In the shape of a Tape & Reel , it's packaged.It is pointing in the direction of Surface Mount .A supply voltage of 5V allows for high efficiency.A total of 128 terminations are contained within FIFO means.128 pin is used for operation.The maximum current required for its operation is 100mA .A voltage of 5V should be used for FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.It consists of a total of 128 pins.A frequency of 40MHz is capable of maintaining good accuracy.There is 40MHz FIFO memory IC's maximum value for regular operation.Normally, 5V power supplies are owned by the component.
72815LB25PF8 Features
FIFOs category
Frequency at most
72815LB25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72815LB25PF8 FIFOs Memory applications.
- Address mapping
- Network bridges
- Application that requires re-writable nonvolatile parameter memory
- A/D output buffers
- Desktop Computers
- Analog-to-digital converters
- Magnetic memories
- Switches
- Networking
- General Data Collection Applications at Low-Temperatures
