7281L15PAI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 125mA |
| Max Supply Current | 125mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Density | 9 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7281L15PAI8 Overview
This package is included in TSSOP .The recommended mounting way is Surface Mount .High efficiency is possible with a supply voltage of 5V .A total of 56 terminations can be found in FIFO means.FIFO design has 56 operation pins.For its operation, 125mA is the maximum current required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget in FIFOs is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Approximately 56 pins are attached to it.Normaly, the component is powered by 5V power supplies.Using this gadget, RETRANSMIT can also be generated.There is 40MHz frequency set for the clock of the FIFO memory IC.
7281L15PAI8 Features
FIFOs category
Clock frequency of 40MHz
7281L15PAI8 Applications
There are a lot of Integrated Device Technology (IDT) 7281L15PAI8 FIFOs Memory applications.
- Signal processing
- Multimedia
- Test Equipment
- Magnetic memories
- Controlled baseline
- Portable Information Devices
- Down-Hole Energy Drilling
- Queues for communication systems
- Video Processing
- Network switching/routing
