72821L10PF
| Parameters | |
|---|---|
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
72821L10PF Overview
TQFP is a package that contains FIFO memory chip.A Surface Mount mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.A total of 64 terminations can be found in FIFO means.FIFO design has 64 operation pins.Its maximum operating current is 60mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.This gadget is self-contained in?FIFOs .It has a OTHER FIFO memory type IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.The FIFO memory IC is equipped with a total of 64 pins.A frequency of 100MHz is sufficient to maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .In normal circumstances, the component has 5V power supplies.
72821L10PF Features
FIFOs category
Frequency at most
72821L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72821L10PF FIFOs Memory applications.
- Industrial Systems
- Product traceability
- General Data Collection Applications at Extreme High-Temperatures
- HDD
- GPS Offender Tracking
- Telecommunication
- SPI Bus Flash Memory Devices
- Computer networks
- Look-up Tables
- Wireless
