72821L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72821L10PF8 Overview
TQFP is a package that contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.High efficiency is possible with a supply voltage of 5V .64 terminations are contained in FIFO means.FIFO design has 64 operation pins.In order to operate it, it requires 60mA volts of current.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is OTHER FIFO memory type.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.Approximately 64 pins are attached to it.When the frequency is set to 100MHz , the system can maintain good accuracy.For regular operation, the memory logic's maximum value is 100MHz .Normally, 5V power supplies are owned by the component.
72821L10PF8 Features
FIFOs category
Frequency at most
72821L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72821L10PF8 FIFOs Memory applications.
- Alarm System
- IP Camera Buffer
- Telecommunication
- Application that requires re-writable nonvolatile parameter memory
- Firmware loaders
- General Data Collection Applications at Low-Temperatures
- Cardiac Monitoring Device
- Switches
- Battery Charger
- Transistors
