72821L10PFG
| Parameters | |
|---|---|
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
72821L10PFG Overview
FIFO memory chip is included in the TQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.It is possible to achieve high efficiency with a supply voltage of 5V .I found that it has 64 terminations in FIFO means.As far as the operation pins are concerned, they are 64 pins.In order for FIFO design to operate, a maximum current of 60mA is required.A 5V supply voltage will ensure FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.It has a total of 64 pins on it.A frequency of 100MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.Normaly, the component is powered by 5V power supplies.
72821L10PFG Features
FIFOs category
Frequency at most
72821L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72821L10PFG FIFOs Memory applications.
- Cardiac Monitoring Device
- Disk Controllers
- Video
- Video time base correction
- Seismic Data Collection at Extreme Temperatures
- GPS Offender Tracking
- Controlled baseline
- Buses
- Product traceability
- Consumer
