72821L10TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72821L10TF8 Overview
The LQFP package contains FIFO memory chip.There's a Tape & Reel on the package.It is pointing in the direction of Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.A total of 64 terminations are contained within FIFO means.There are 64 pins on the operation pins.FIFO design requires a maximum current of 60mA to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.The FIFO memory IC is equipped with a total of 64 pins.A frequency of 100MHz is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .Components normally possess 5V power supplies.
72821L10TF8 Features
FIFOs category
Frequency at most
72821L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72821L10TF8 FIFOs Memory applications.
- Product traceability
- Emulators
- Computers
- Data-acquisition systems
- Cardiac Monitoring Device
- Test site
- Computer Systems
- MP3 Interface for Automobile
- High-speed graphics pixel buffer
- Measurement Equipment
