Parameters |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
LQFP |
Number of Pins |
64 |
Published |
2013 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
64 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Frequency |
66.7MHz |
Time@Peak Reflow Temperature-Max (s) |
20 |
Pin Count |
64 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Nominal Supply Current |
60mA |
Max Supply Current |
60mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Organization |
1KX9 |
Density |
18 kb |
Standby Current-Max |
0.01A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Bidirectional |
FWFT Support |
No |
Programmable Flags Support |
Yes |
Output Enable |
YES |
Cycle Time |
15 ns |
Height Seated (Max) |
1.6mm |
Length |
10mm |
Width |
10mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72821L15TF Overview
You can find FIFO memory chip in package LQFP .Surface Mount is recommended as the mounting method.A supply voltage of 5V is capable of producing high efficiency.A total of 64 terminations are contained within FIFO means.FIFO design has 64 operation pins.FIFO design requires a maximum current of 60mA to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained in FIFOs .The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.It has a total of 64 pins on it.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .In normal circumstances, the component has 5V power supplies.
72821L15TF Features
FIFOs category
Frequency at most
72821L15TF Applications
There are a lot of Integrated Device Technology (IDT) 72821L15TF FIFOs Memory applications.
- Portable Information Devices
- Fabrication Site
- Data-acquisition systems
- Microprogramming
- Battery Charger
- Event Recorder
- Communications
- IP Radio
- Industrial Systems
- General Data Collection Applications at Extreme High-Temperatures