72821L15TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72821L15TF8 Overview
LQFP is a package that contains FIFO memory chip.There's a Tape & Reel on the package.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 5V , high efficiency is possible.FIFO consists of 64 terminations, which indicates that FIFO means is empty.There are 64 pins on the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.A self-contained gadget is contained within FIFOs .This part has a memory type of OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.Currently, it has 64 pins.With a frequency of 66.7MHz , it maintains good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.Normally, 5V power supplies are owned by the component.
72821L15TF8 Features
FIFOs category
Frequency at most
72821L15TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72821L15TF8 FIFOs Memory applications.
- Address mapping
- Networking
- Computers
- Telecommunication
- Fabrication Site
- Communications
- Portable Information Devices
- MP3 Interface for Automobile
- Data-acquisition systems
- Buses
