72821L25PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72821L25PF Overview
This package is included in TQFP .It is pointing in the direction of Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.FIFO design has 64 operation pins.FIFO requires a minimum of 60mA current to operate.A voltage of 5V should be used for FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 64 pins on this FIFO memory IC.A frequency of 40MHz is sufficient to maintain good accuracy.During regular operation, the FIFO memory's maximum value is 40MHz .It is normal for a component to be equipped with 5V power supplies.
72821L25PF Features
FIFOs category
Frequency at most
72821L25PF Applications
There are a lot of Integrated Device Technology (IDT) 72821L25PF FIFOs Memory applications.
- Smart Meter
- Seismic Data Collection at Extreme Temperatures
- Extended product life cycle
- Telecommunication
- Look-up Tables
- Firmware loaders
- Laser Receiver System
- IP Camera Buffer
- IP Radio
- SPI Bus Flash Memory Devices
