72821L25PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72821L25PF8 Overview
The TQFP package contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V , high efficiency is possible.FIFO consists of 64 terminations, which indicates that FIFO means is empty.The operation pins are 64 pins.FIFO design requires a maximum current of 60mA to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Approximately 64 pins are attached to it.A frequency of 40MHz is sufficient to maintain good accuracy.There is 40MHz FIFO memory IC's maximum value for regular operation.It is normal for a component to be equipped with 5V power supplies.
72821L25PF8 Features
FIFOs category
Frequency at most
72821L25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72821L25PF8 FIFOs Memory applications.
- Firmware loaders
- Computer Systems
- Fabrication Site
- Medical Monitoring Device
- Multimedia
- Video
- Wireless
- Buses
- Communications
- Code converters
