72821L25PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72821L25PFI Overview
TQFP is a package that contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 5V results in high efficiency.FIFO means contains a total of 64 terminations.The operation pins are 64 pins.For its operation, 60mA is the maximum current required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.It operates at -40°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained within FIFOs .It has a OTHER FIFO memory type IC.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.Approximately 64 pins are attached to it.A frequency of 40MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 40MHz can be used for regular operation.There are normally 5V power supplies attached to the component.
72821L25PFI Features
FIFOs category
Frequency at most
72821L25PFI Applications
There are a lot of Integrated Device Technology (IDT) 72821L25PFI FIFOs Memory applications.
- Cardiac Monitoring Device
- Laser Receiver System
- Networking
- Alarm System
- One assembly
- Transistors
- Controlled baseline
- Extended product life cycle
- High-speed disk
- Address mapping
