72821L25TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72821L25TF8 Overview
The LQFP package contains FIFO memory chip.There is a case Tape & Reel in which it is packaged.It is recommended that memory IC be mounted in the Surface Mount direction.It is possible to achieve high efficiency with a supply voltage of 5V .I found that it has 64 terminations in FIFO means.The operation pins are 64 pins.There is a maximum current requirement of 60mA for its operation.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.It operates at 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , this gadget is self-contained.The IC of the part is OTHER FIFO memory type.Low supply voltages, such as 4.5V V, may be required for operation.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Approximately 64 pins are attached to it.A frequency of 40MHz is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 40MHz .Normally, the component owns 5V power supplies.
72821L25TF8 Features
FIFOs category
Frequency at most
72821L25TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72821L25TF8 FIFOs Memory applications.
- Data
- Optical memories
- Alarm System
- Switches
- High-speed disk
- Temporary storage elements
- Industrial Systems
- Character generators
- Network switching/routing
- Smart Meter
