banner_page

72825LB10PF

128 Terminations5V 128 Pin FIFO memory IC6.5 ns Min 4.5V VMax 5.5V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-72825LB10PF
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 259
  • Description: 128 Terminations5V 128 Pin FIFO memory IC6.5 ns Min 4.5V VMax 5.5V V(Kg)

Details

Tags

Parameters
Published 2009
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 128
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Frequency 100MHz
Pin Count 128
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Nominal Supply Current 100mA
Max Supply Current 100mA
Frequency (Max) 100MHz
Access Time 6.5 ns
Organization 1KX18
Density 36 kb
Standby Current-Max 0.01A
Parallel/Serial PARALLEL
Sync/Async Synchronous
Word Size 18b
Memory IC Type OTHER FIFO
Bus Directional Bidirectional
Retransmit Capability No
FWFT Support Yes
Output Enable YES
Cycle Time 10 ns
Height Seated (Max) 1.6mm
Length 20mm
Width 14mm
Thickness 1.4mm
RoHS Status RoHS Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Contact Plating Lead, Tin
Mount Surface Mount
Package / Case TQFP
Number of Pins 128

72825LB10PF Overview


FIFO memory chip can be found in the TQFP package.It is pointing in the direction of Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.I found that it has 128 terminations in FIFO means.128 pins are the operation pins.For its operation, 100mA is the maximum current required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.A self-contained gadget is contained in FIFOs .A OTHER FIFO memory type IC is used in the part.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC has a total of 128 pins.In the presence of a 100MHz frequency, it can maintain good accuracy.Normally, the FIFO memory's maximum value is 100MHz .It is normal for a component to be equipped with 5V power supplies.

72825LB10PF Features


FIFOs category
Frequency at most

72825LB10PF Applications


There are a lot of Integrated Device Technology (IDT) 72825LB10PF FIFOs Memory applications.

  • Queues for communication systems
  • Seismic Data Collection at Extreme Temperatures
  • Optical memories
  • Address mapping
  • A/D output buffers
  • Test site
  • Character generators
  • Code converters
  • High-speed graphics pixel buffer
  • Laser Receiver System

Write a review

Note: HTML is not translated!
    Bad           Good