72825LB10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX18 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72825LB10PFG8 Overview
FIFO memory chip is included in the TQFP package.There is a case Tape & Reel in which it is packaged.A Surface Mount mounting method is recommended.When the supply voltage is 5V there is the possibility of high efficiency.FIFO consists of 128 terminations, which indicates that FIFO means is empty.There are 128 pins on the operation pins.There is a maximum current requirement of 100mA for its operation.A voltage of 5V should be used for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.Low supply voltages, such as 4.5V V, may be required for operation.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.Currently, it has 128 pins.It is capable of maintaining good accuracy with a frequency of 100MHz .Normally, the FIFO memory's maximum value is 100MHz .
72825LB10PFG8 Features
Frequency at most
72825LB10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72825LB10PFG8 FIFOs Memory applications.
- Character generators
- Multimedia
- High-speed disk
- Data-acquisition systems
- Battery Charger
- Seismic Data Collection at Extreme Temperatures
- Medical Monitoring Device
- Measurement Equipment
- Video Processing
- Communications
