72825LB15BG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 121 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 121 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 121 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.5mm |
| Length | 15mm |
| Width | 15mm |
| Thickness | 2.15mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72825LB15BG8 Overview
FIFO memory chip is contained in the BGA package.It comes in a Tape & Reel package.The recommended mounting way is Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains a total of 121 terminations.121 pin is used for operation.FIFO design requires 100mA amps of current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.This gadget is self-contained in?FIFOs .The IC of the part is of the type OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.There are a total of 121 pins on this FIFO memory IC.It maintains good accuracy at a 66.7MHz frequency.For regular operation, the memory logic's maximum value is 66.7MHz .Normally, the component owns 5V power supplies.
72825LB15BG8 Features
FIFOs category
Frequency at most
72825LB15BG8 Applications
There are a lot of Integrated Device Technology (IDT) 72825LB15BG8 FIFOs Memory applications.
- High-speed graphics pixel buffer
- General Data Collection Applications at Low-Temperatures
- Networking
- Code converters
- HDD
- Telecommunication
- Controlled baseline
- MP3 Interface for Automobile
- IP Radio
- Smart Meter
