72825LB15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72825LB15PF Overview
The TQFP package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.A supply voltage of 5V allows for high efficiency.FIFO consists of 128 terminations, which indicates that FIFO means is empty.FIFO design has 128 operation pins.In order for FIFO design to operate, a maximum current of 100mA is required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum voltage of 5.5V volts can be applied to FIFO memory.Approximately 128 pins are attached to it.With a frequency of 66.7MHz , it exhibits good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .A component normally has 5V power supplies attached to it.
72825LB15PF Features
FIFOs category
Frequency at most
72825LB15PF Applications
There are a lot of Integrated Device Technology (IDT) 72825LB15PF FIFOs Memory applications.
- Analog-to-digital converters
- Wireless
- Data-acquisition systems
- Video time base correction
- High-speed graphics pixel buffer
- Code converters
- Queues for communication systems
- Switches
- Product traceability
- Temporary storage elements
