72825LB25PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72825LB25PF Overview
FIFO memory chip is included in the TQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains 128 terminations.128 pin is used for operation.The maximum current required for its operation is 100mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.It has a total of 128 pins on it.It maintains good accuracy at a 40MHz frequency.During regular operation, the FIFO memory's maximum value is 40MHz .Components normally possess 5V power supplies.
72825LB25PF Features
FIFOs category
Frequency at most
72825LB25PF Applications
There are a lot of Integrated Device Technology (IDT) 72825LB25PF FIFOs Memory applications.
- Extended product-change notification
- Consumer
- IP Camera Buffer
- SPI Bus Flash Memory Devices
- Portable Information Devices
- Game Consoles
- Seismic Data Collection at Extreme Temperatures
- Portable Information Devices
- Data
- TVs
