7282L12PA8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 125mA |
| Max Supply Current | 125mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7282L12PA8 Overview
You will find FIFO memory chip in the TSSOP package.Mounting it in the Surface Mount way is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 56 terminations.56 pins are used for operation.FIFO design requires 125mA amps of current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.It consists of a total of 56 pins.Normally, 5V power supplies are owned by the component.The gadget can also generate a value of RETRANSMIT .There is 50MHz frequency set for the clock of the FIFO memory IC.
7282L12PA8 Features
FIFOs category
Clock frequency of 50MHz
7282L12PA8 Applications
There are a lot of Integrated Device Technology (IDT) 7282L12PA8 FIFOs Memory applications.
- Measurement Equipment
- Character generators
- Video Processing
- Data
- One assembly
- Application that requires re-writable nonvolatile parameter memory
- A/D output buffers
- Transistors
- SPD for DDR3 Memory Modules
- IP Camera Buffer
