7282L12PAG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 125mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Direction | Bidirectional |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7282L12PAG8 Overview
FIFO memory chip can be found in the TSSOP package.The recommended mounting way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.A total of 56 terminations can be found in FIFO means.56 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 125mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is contained within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.It consists of a total of 56 pins.Components normally possess 5V power supplies.Additionally, RETRANSMIT can be generated with this FIFO memory.The FIFO memory IC is controlled by a clock with a frequency of 50MHz .
7282L12PAG8 Features
FIFOs category
Clock frequency of 50MHz
7282L12PAG8 Applications
There are a lot of Integrated Device Technology (IDT) 7282L12PAG8 FIFOs Memory applications.
- High-speed graphics pixel buffer
- Industrial Systems
- Programmable Logic Controller
- Code converters
- Notebook
- Multimedia
- Rate buffers
- Wireless
- A/D output buffers
- Consumer
