7282L15PAI
| Parameters | |
|---|---|
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 125mA |
| Max Supply Current | 125mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
7282L15PAI Overview
FIFO memory chip is contained in the TSSOP package.The recommended mounting way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains 56 terminations.There are 56 pins for operation.FIFO design requires 125mA amps of current to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.It is contained within FIFOs .The IC of the part is of the type OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 56 pins on this FIFO memory IC.Components normally possess 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.A clock running at frequency 40MHz is used by the FIFO memory IC.
7282L15PAI Features
FIFOs category
Clock frequency of 40MHz
7282L15PAI Applications
There are a lot of Integrated Device Technology (IDT) 7282L15PAI FIFOs Memory applications.
- Firmware loaders
- Microprogramming
- Routers
- Game Controller
- Application that requires re-writable nonvolatile parameter memory
- Data communications
- Industrial Systems
- IP Radio
- Portable Information Devices
- High-speed disk
