72831L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72831L10PF8 Overview
FIFO memory chip can be found in the TQFP package.The recommended mounting way is Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.A total of 64 terminations can be found in FIFO means.The operation pins are 64 pins.FIFO design requires a maximum current of 60mA to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is self-contained in FIFOs .It has a OTHER FIFO memory type IC.Low supply voltages, such as 4.5V V, may be required for operation.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.It has a total of 64 pins on it.A frequency of 100MHz is sufficient to maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .There are normally 5V power supplies attached to the component.
72831L10PF8 Features
FIFOs category
Frequency at most
72831L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72831L10PF8 FIFOs Memory applications.
- Multi-stage synchronizer
- Data
- Consumer Systems
- Thermal Management for DDR3 Memory Modules
- Cardiac Monitoring Device
- GPS Offender Tracking
- Digital buffering
- Routers
- Optical memories
- Laser Receiver System
