72831L10TF8
| Parameters | |
|---|---|
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX9 |
72831L10TF8 Overview
You can find FIFO memory chip in package LQFP .In this case, it is packaged in case number Tape & Reel .It is pointing in the direction of Surface Mount .A supply voltage of 5V allows for high efficiency.The number of terminations in FIFO means is 64 .Operation pins are 64 .There is a maximum current requirement of 60mA for its operation.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.There is a self-contained gadget within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 64 pins on this board.When the frequency is set to 100MHz it can maintain good accuracy.Normally, the FIFO memory's maximum value is 100MHz .It is normal for the component to own 5V power supplies.
72831L10TF8 Features
FIFOs category
Frequency at most
72831L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72831L10TF8 FIFOs Memory applications.
- Computer networks
- Consumer
- Game Controller
- Routers
- Game Consoles
- Test Equipment
- Measurement Equipment
- Microprogramming
- High-speed disk
- Cameras
