72831L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72831L15PFI Overview
You can find FIFO memory chip in package TQFP .Mounting it in Surface Mount is recommended.A supply voltage of 5V is capable of producing high efficiency.I found that it has 64 terminations in FIFO means.These are the 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .For FIFO's maximum efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.An operating temperature of 85°C °C is necessary for stable operation.It is contained within FIFOs .It has a OTHER FIFO memory type IC.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.Approximately 64 pins are attached to it.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.
72831L15PFI Features
FIFOs category
Frequency at most
72831L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72831L15PFI FIFOs Memory applications.
- Computer Systems
- Desktop Computers
- Industrial Systems
- Temporary storage elements
- Transistors
- Notebook
- IP Camera Buffer
- Test site
- Tape controllers
- Game Consoles
