72831L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72831L15PFI8 Overview
You can find FIFO memory chip in package TQFP .The package comes in a case of Tape & Reel .Memory IC's recommended mounted way is Surface Mount .An input voltage of 5V results in high efficiency.A total of 64 terminations are contained within FIFO means.In the case of the operation pins, they are 64 pins.FIFO design requires 60mA amps of current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.This FIFO memory IC is equipped with 64 pins in total.When the frequency is set to 66.7MHz , the system can maintain good accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .It is normal for the component to own 5V power supplies.
72831L15PFI8 Features
FIFOs category
Frequency at most
72831L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72831L15PFI8 FIFOs Memory applications.
- Emulators
- Address mapping
- Optical memories
- Notebook
- Controlled baseline
- Application that requires re-writable nonvolatile parameter memory
- Computers
- Telecommunication
- Down-Hole Energy Drilling
- High-speed graphics pixel buffer
