72831L25PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72831L25PF Overview
You can find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.FIFO means contains a total of 64 terminations.FIFO design has 64 operation pins.In order to operate FIFO design, a maximum current of 60mA is required.A supply voltage of 5V is recommended for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.An input voltage of 5.5V V is the maximum that FIFO memory can handle.As a result, it contains a total of 64 pins.Despite a frequency of 40MHz , it is capable of maintaining good accuracy.Normally, the FIFO memory's maximum value is 40MHz .It is normal for a component to be equipped with 5V power supplies.
72831L25PF Features
FIFOs category
Frequency at most
72831L25PF Applications
There are a lot of Integrated Device Technology (IDT) 72831L25PF FIFOs Memory applications.
- Battery Charger
- Thermal Management for DDR3 Memory Modules
- Test site
- Queues for communication systems
- Video Processing
- Rate buffers
- General Data Collection Applications at Extreme High-Temperatures
- Laser Receiver System
- Multi-stage synchronizer
- Data communications
