72831L25PF8
| Parameters | |
|---|---|
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
72831L25PF8 Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.I found that it has 64 terminations in FIFO means.In the case of the operation pins, they are 64 pins.Its maximum operating current is 60mA .For FIFO's maximum efficiency, the supply voltage should be set to 5V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.In FIFOs , this gadget is self-contained.This part has a memory type of OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 64 pins on this board.When the frequency is set to 40MHz it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 40MHz .In normal circumstances, the component has 5V power supplies.
72831L25PF8 Features
FIFOs category
Frequency at most
72831L25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72831L25PF8 FIFOs Memory applications.
- Firmware loaders
- Notebook
- One assembly
- SPI Bus Flash Memory Devices
- Laser Receiver System
- Multi-stage synchronizer
- Controlled baseline
- SPI Bus Flash Memory Device
- Analog-to-digital converters
- Extended product life cycle
