72831L25PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72831L25PFI Overview
TQFP is the package in which FIFO memory chip is contained.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 64 terminations.Operation pins are 64 .FIFO design requires a maximum current of 60mA to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.The FIFO memory IC has a total of 64 pins.A frequency of 40MHz is capable of maintaining good accuracy.40MHz is the FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.
72831L25PFI Features
FIFOs category
Frequency at most
72831L25PFI Applications
There are a lot of Integrated Device Technology (IDT) 72831L25PFI FIFOs Memory applications.
- Computers
- Notebook
- Alarm System
- Measurement Equipment
- Video Processing
- A/D output buffers
- IP Radio
- General Data Collection Applications at Extreme High-Temperatures
- One assembly
- Analog-to-digital converters
