72831L25TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72831L25TF Overview
LQFP is a package that contains FIFO memory chip.Mounting it in Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains a total of 64 terminations.64 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained in FIFOs .A OTHER FIFO memory type IC is used in the part.Low supply voltages, such as 4.5V V, may be required for operation.An input voltage of 5.5V V is the maximum that FIFO memory can handle.It has a total of 64 pins on it.With a frequency of 40MHz , it maintains good accuracy.Regular operation has a FIFO memory's maximum value of 40MHz .Normally, the component owns 5V power supplies.
72831L25TF Features
FIFOs category
Frequency at most
72831L25TF Applications
There are a lot of Integrated Device Technology (IDT) 72831L25TF FIFOs Memory applications.
- IP Camera Buffer
- Fabrication Site
- Test site
- One assembly
- Multi-stage synchronizer
- A/D output buffers
- High-speed graphics pixel buffer
- TVs
- MP3 Interface for Automobile
- High-speed disk
