7283L12PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7283L12PA Overview
TSSOP is a package that contains FIFO memory chip.Surface Mount is recommended as the mounting method.It is possible to achieve high efficiency with a supply voltage of 5V .A total of 56 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 56 pins.FIFO requires a minimum of 150mA current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained in FIFOs .A OTHER FIFO memory type IC is used in the part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.Currently, it has 56 pins.A component normally has 5V power supplies attached to it.This gadget can also be used to generate RETRANSMIT .The clock of the FIFO memory IC runs at 50MHz frequency.
7283L12PA Features
FIFOs category
Clock frequency of 50MHz
7283L12PA Applications
There are a lot of Integrated Device Technology (IDT) 7283L12PA FIFOs Memory applications.
- Magnetic memories
- Portable Information Devices
- HDD
- Firmware loaders
- Tape controllers
- Cardiac Monitoring Device
- Analog-to-digital converters
- General Data Collection Applications at Extreme High-Temperatures
- Buses
- Programmable Logic Controller
