7283L12PA8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7283L12PA8 Overview
TSSOP is a package that contains FIFO memory chip.Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO consists of 56 terminations, which indicates that FIFO means is empty.There are 56 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 150mA .When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.The FIFO memory IC is equipped with a total of 56 pins.There are normally 5V power supplies attached to the component.It is also possible to generate RETRANSMIT using this FIFO memory.This FIFO memory IC has a clock frequency of 50MHz .
7283L12PA8 Features
FIFOs category
Clock frequency of 50MHz
7283L12PA8 Applications
There are a lot of Integrated Device Technology (IDT) 7283L12PA8 FIFOs Memory applications.
- Queues for communication systems
- Rate buffers
- Data communications
- Network bridges
- Transistors
- Communications Systems
- Emulators
- Video
- One assembly
- Extended product-change notification
