7283L15PAGI8
| Parameters | |
|---|---|
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Packaging | Tape & Reel |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 125mA |
| Max Supply Current | 150mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Direction | Bidirectional |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
7283L15PAGI8 Overview
The TSSOP package contains FIFO memory chip.The package comes in a case of Tape & Reel .A Surface Mount mounting method is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO consists of 56 terminations, which indicates that FIFO means is empty.Operation pins are 56 .FIFO design requires a maximum current of 150mA to operate.A voltage of 5V should be used for FIFO's maximum efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.There is a self-contained gadget within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 56 pins in total.There are normally 5V power supplies attached to the component.It is also possible to generate RETRANSMIT using this FIFO memory.There is 40MHz frequency set for the clock of the FIFO memory IC.
7283L15PAGI8 Features
FIFOs category
Clock frequency of 40MHz
7283L15PAGI8 Applications
There are a lot of Integrated Device Technology (IDT) 7283L15PAGI8 FIFOs Memory applications.
- Game Consoles
- Medical Monitoring Device
- Signal processing
- Data communications
- Address mapping
- Microprogramming
- Industrial Systems
- General Data Collection Applications at Low-Temperatures
- Down-Hole Energy Drilling
- GPS Offender Tracking
