7283L15PAI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7283L15PAI Overview
The TSSOP package contains FIFO memory chip.It is pointing in the direction of Surface Mount .High efficiency is possible with a supply voltage of 5V .FIFO means contains 56 terminations.There are 56 pins for operation.There is a maximum current requirement of 150mA for its operation.In order to maximize efficiency, the supply voltage should be set to 5V .This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 85°C °C is necessary for stable operation.There is a self-contained gadget within FIFOs .In this part, the memory type is OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.As a result, it contains a total of 56 pins.The component normally owns 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.A clock running at frequency 40MHz is used by the FIFO memory IC.
7283L15PAI Features
FIFOs category
Clock frequency of 40MHz
7283L15PAI Applications
There are a lot of Integrated Device Technology (IDT) 7283L15PAI FIFOs Memory applications.
- Consumer
- IP Camera Buffer
- Test Equipment
- A/D output buffers
- IP Radio
- High-speed graphics pixel buffer
- Character generators
- Fabrication Site
- Portable Information Devices
- Network bridges
