7283L20PA8
| Parameters | |
|---|---|
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 33MHz |
| Access Time | 20 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
7283L20PA8 Overview
TSSOP is the package in which FIFO memory chip is contained.Surface Mount is recommended as the mounting method.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO consists of 56 terminations, which indicates that FIFO means is empty.As far as the operation pins are concerned, they are 56 pins.FIFO design requires 150mA amps of current to operate.A supply voltage of 5V is recommended for FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget in FIFOs is self-contained.The IC of the part is of the type OTHER FIFO .Low supply voltages, such as 4.5V V, may be required for operation.A maximum voltage of 5.5V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 56 pins in total.Normaly, the component is powered by 5V power supplies.The clock of the FIFO memory IC runs at 33MHz frequency.
7283L20PA8 Features
FIFOs category
Clock frequency of 33MHz
7283L20PA8 Applications
There are a lot of Integrated Device Technology (IDT) 7283L20PA8 FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Down-Hole Energy Drilling
- General Data Collection Applications at Extreme High-Temperatures
- Microprogramming
- Alarm System
- Test site
- Wireless
- One assembly
- Code converters
- SPI Bus Flash Memory Devices
