72841L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72841L10PFG8 Overview
The TQFP package contains FIFO memory chip.It comes in a Tape & Reel package.Mounting it in Surface Mount is recommended.When the supply voltage is 5V there is the possibility of high efficiency.As a result of this, FIFO means contains 64 terminations.FIFO design has 64 operation pins.In order for FIFO design to operate, a maximum current of 60mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , there is a self-contained gadget.This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 4.5V V, may be required for operation.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.As a result, it contains a total of 64 pins.With a frequency of 100MHz , it exhibits good accuracy.The memory logic's maximum value is 100MHz for regular operation.A component normally has 5V power supplies attached to it.
72841L10PFG8 Features
FIFOs category
Frequency at most
72841L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72841L10PFG8 FIFOs Memory applications.
- PC peripheral
- Address mapping
- Programmable Logic Controller
- Extended product-change notification
- General Data Collection Applications at Low-Temperatures
- Video
- Extended product life cycle
- Game Consoles
- TVs
- Event Recorder
