72841L10TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72841L10TF Overview
FIFO memory chip is included in the LQFP package.The recommended mounting method for this FIFO products is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.The number of terminations in FIFO means is 64 .Operation pins are 64 .The maximum current required for its operation is 60mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.This FIFO memory IC is equipped with 64 pins in total.In the presence of a 100MHz frequency, it can maintain good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.It is normal for a component to be equipped with 5V power supplies.
72841L10TF Features
FIFOs category
Frequency at most
72841L10TF Applications
There are a lot of Integrated Device Technology (IDT) 72841L10TF FIFOs Memory applications.
- Medical Monitoring Device
- Alarm System
- Smart Meter
- Test site
- Data
- Portable Information Devices
- Multimedia
- Tape controllers
- SPI Bus Flash Memory Devices
- IP Camera Buffer
