72841L10TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72841L10TF8 Overview
LQFP is a package that contains FIFO memory chip.In this case, it is packaged in case number Tape & Reel .It is pointing in the direction of Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains 64 terminations.As far as the operation pins are concerned, they are 64 pins.For its operation, 60mA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .The IC of the part is OTHER FIFO memory type.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.A total of 64 pins are present on the FIFO memory IC.It is capable of maintaining good accuracy with a frequency of 100MHz .Normally, the FIFO memory's maximum value is 100MHz .It is normal for the component to own 5V power supplies.
72841L10TF8 Features
FIFOs category
Frequency at most
72841L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72841L10TF8 FIFOs Memory applications.
- Address mapping
- Extended product-change notification
- Video Processing
- Firmware loaders
- Programmable Logic Controller
- Test Equipment
- Consumer
- Extended product life cycle
- Networking
- One assembly
