72841L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX9 |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72841L15PF8 Overview
The TQFP package contains FIFO memory chip.The recommended mounting way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.In FIFO means, there are 64 terminations.FIFO design has 64 operation pins.FIFO requires a minimum of 60mA current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.As a result, it contains a total of 64 pins.For regular operation, the memory logic's maximum value is 66.7MHz .Normally, the component owns 5V power supplies.
72841L15PF8 Features
FIFOs category
Frequency at most
72841L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72841L15PF8 FIFOs Memory applications.
- GPS Offender Tracking
- IP Camera Buffer
- Transistors
- Fabrication Site
- General Data Collection Applications at Low-Temperatures
- Queues for communication systems
- Communications
- Thermal Management for DDR3 Memory Modules
- Consumer Systems
- Data
