72841L15PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 66.7MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Access Time | 10 ns |
| Direction | Bidirectional |
| Density | 72 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| RoHS Status | RoHS Compliant |
72841L15PFG Overview
This package is included in TQFP .Surface Mount is recommended as the mounting method.Operation pins are 64 .FIFO requires a minimum of 60mA current to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.
72841L15PFG Features
72841L15PFG Applications
There are a lot of Integrated Device Technology (IDT) 72841L15PFG FIFOs Memory applications.
- Disk Controllers
- Firmware loaders
- SPI Bus Flash Memory Devices
- Consumer
- Medical Monitoring Device
- Multimedia
- Thermal Management for DDR3 Memory Modules
- Network bridges
- Battery Charger
- Look-up Tables
