72841L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 4.5kB |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 9b |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72841L15PFI Overview
FIFO memory chip is contained in the TQFP package.In addition to storing applications and data, the FIFO chips have a memory of 4.5kB .Surface Mount is memory IC's recommended mounting method.If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 64 terminations.FIFO design has 64 operation pins.The maximum current required for its operation is 60mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 66.7MHz it can maintain good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.The component normally owns 5V power supplies.Using 2 circuits allows for enhanced flexibility.
72841L15PFI Features
4.5kB memory size
FIFOs category
Frequency at most
72841L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72841L15PFI FIFOs Memory applications.
- Video time base correction
- Industrial Systems
- GPS Offender Tracking
- Temporary storage elements
- Computer Systems
- Application that requires re-writable nonvolatile parameter memory
- PC peripheral
- Game Controller
- Seismic Data Collection at Extreme Temperatures
- A/D output buffers
