72841L15TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2005 |
| Part Status | Discontinued |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 66.7MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Direction | Bidirectional |
| Density | 72 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72841L15TF Overview
You can find FIFO memory chip in package LQFP .A Surface Mount mounting method is recommended.64 pin is used for operation.For its operation, 60mA is the maximum current required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.FIFO may operate at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.When the frequency is set to 66.7MHz it can maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .
72841L15TF Features
Frequency at most
72841L15TF Applications
There are a lot of Integrated Device Technology (IDT) 72841L15TF FIFOs Memory applications.
- Industrial Systems
- Programmable Logic Controller
- Computers
- Multi-stage synchronizer
- Data-acquisition systems
- Game Controller
- Address mapping
- Switches
- Measurement Equipment
- A/D output buffers
